Filters
Filters
Reset all filtersAmplifier class
Amplifier Output
Antenna type
Antenna types
Application
Applications
Automation
Bandwidth
BCI
Brand
Cable series
Calibration
Compatibility
Conducted operation
Control interfaces
Controller type
Coupling
Current
Dynamic range
Form factor
Frequency bands
Frequency coverage
Frequency Range
Insertion Impedance
Interfaces
Line Types
Load handling
Max Cable Diameter
Max Current
Max Output Power
Max Voltage
Measurement type
Minimum Drop/Rise Time
Network
Operating mode
Operating system
Operation
Operation modes
Output connector
Output connectors
Output Impedance
Output Offset
Output Offset Current
Output power
Peak pulse power
Performance
Phases
Power handling
Power supply
Pulse width
RF Generator
Sample rate
Signal Type
Slew rate
Software
Software type
Standards
Supported standards
Supported tests
Technology
Type
User interface
Voltage
Warranty
AE Techron
-
Linear Amplifier 7200
AE Techron
Frequency Range: DC to 400 kHz (small-signal response up to 1 MHz, model dependent)
Output power: 1 to 4 kVA (model dependent)
Operating mode: Four-quadrant operation
Read more -
Linear Amplifier 7700
AE Techron
Frequency Range: DC to 50 kHz at rated power (small-signal bandwidth up to 150 kHz, model dependent)
Output power: 2.5 to 5 kW (model dependent)
Operating mode: Four-quadrant operation (source and sink)
Read more -
Linear Amplifier 7800
AE Techron
Bandwidth: DC to 60 kHz
Output Offset: <±200 µV
Output Offset Current: <10 mA, DC
Read more -
Switch-Mode Amplifier 8300
AE Techron
Bandwidth: DC to 50 kHz
Voltage: 0 to 140 VRMS; 0 to 200 VDC
Slew rate: Up to 60 V/µs
Read more -
Switch-Mode Amplifier 8500
AE Techron
Bandwidth: DC to 50 kHz
Voltage: 0 to 250 VRMS; 0 to 350 VDC
Slew rate: 0 to 250 VRMS; 0 to 350 VDC
Read more -
Switch-Mode Amplifier 8600
AE Techron
Bandwidth: DC to 50 kHz
Voltage: 0 to 260 VRMS; 0 to 400 VDC
Slew rate: Up to 80 V/µs
Read more -
Switch-Mode Amplifier 8700
AE Techron
Bandwidth: DC to 250 kHz
Voltage: 0 to 250 VRMS; 0 to 350 VDC
Slew rate: Up to 300 V/µs
Read more -
Switch-Mode Amplifier 9100
AE Techron
Bandwidth: DC to 250 kHz
Minimum Drop/Rise Time: 7µs
Slew rate: Up to 150 V/µs
Read more AR RF / Microwave Instrumentation
-
A Series RF Amplifiers
AR RF / Microwave Instrumentation
Frequency Range: kHz to 400 MHz
Output power: Tens of watts to multi-kilowatt CW
Amplifier class: Class A
Read more -
AT Series Log Periodic Antennas
AR RF / Microwave Instrumentation
Frequency coverage: 26 MHz to 12 GHz
Antenna type: Log-periodic
Power handling: Very high RF power handling
Read more -
ATE Series E Field Generators
AR RF / Microwave Instrumentation
Frequency Range: 10 kHz to 100 MHz
Output power: Up to 3000 W
Operation: Broadband electric field generation
Read more -
ATH Series Horn Antennas
AR RF / Microwave Instrumentation
Frequency coverage: 700 MHz to 50 GHz
Antenna types: High-gain horns, microwave horns
Performance: Low VSWR, controlled beamwidth
Read more -
CC series Microwave Cables
AR RF / Microwave Instrumentation
Frequency Range: DC to 40 GHz
Cable series: CC1, CC2, CC4
Power handling: Frequency dependent, high power
Read more -
DC series Dual Directional Couplers
AR RF / Microwave Instrumentation
Frequency Range: 10 kHz to 18 GHz
Power handling: 100 W to 10 kW CW
Type: Dual directional coupler
Read more -
EMCware EMC Software
AR RF / Microwave Instrumentation
Software type: Automated EMC test software
Supported tests: Radiated and conducted EMC tests
Supported standards: IEC, EN, CISPR, ISO, MIL-STD
Read more -
FL series Laser Field Probes
AR RF / Microwave Instrumentation
Frequency coverage: 5 kHz to 60 GHz
Measurement type: CW and pulsed electric field
Power supply: Laser power-over-fiber
Read more -
K-Series Solid State Millimeter Wave Amplifiers
AR RF / Microwave Instrumentation
Frequency Range: 18–26 GHz (18K26) / 26–40 GHz (18Ka40)
Output power: 20, 40, 60, 100, 200, and 300 W models (CW & pulsed)
Read more -
LA series RF Attenuators
AR RF / Microwave Instrumentation
Frequency Range: DC / kHz to 18 GHz
Power handling: 100 W to multi-kilowatt CW
Type: RF load attenuators and terminations
Read more -
S-Series Microwave Amplifiers
AR RF / Microwave Instrumentation
Frequency Range: 0.7 GHz to 18 GHz
Output power: 20 W to 1 kW CW
Amplifier class: Class A
Read more -
SC series System Controllers
AR RF / Microwave Instrumentation
Controller type: Modular RF test controller
Control interfaces: Ethernet, USB, GPIB, RS-232
Automation: Remote control and scripting support
Read more -
SP-Series Pulse Amplifiers
AR RF / Microwave Instrumentation
Frequency bands: 1–2 GHz, 2–4 GHz, 1.2–1.4 GHz, 2.7–3.1 GHz
Peak pulse power: 1 kW to 150 kW
Pulse width: Up to 100 µs
Read more -
T-Series TWT Amplifiers
AR RF / Microwave Instrumentation
Frequency Range: 2.5 GHz to 50 GHz
Output power: Tens of watts to multi-kilowatt
Operation modes: CW and pulsed
Read more -
U-Series RF Amplifiers
AR RF / Microwave Instrumentation
Frequency Range: 10 kHz to 1 GHz
Output power: Few watts to several hundred watts CW
Amplifier class: Class A
Read more -
W-Series RF Amplifiers
AR RF / Microwave Instrumentation
Frequency Range: 80 MHz to 1 GHz
Amplifier class: Class A
Load handling: 100% mismatch tolerant (high VSWR)
Read more Eurofins E&E
-
ARA
Eurofins E&E
Frequency Range: 30 MHz to 1 GHz
Antenna type: Active receive dipole antenna
Dynamic range: 90 dB
Read more -
CGE
Eurofins E&E
Frequency Range: 100 MHz to 18 GHz
Signal Type: Broadband reference comb source
Output connector: Precision SMA
Read more -
YRS
Eurofins E&E
Frequency Range: 1 kHz to 1 GHz
Signal Type: Noise and comb reference source
Output connectors: 2 × 50 Ω N-type
Read more Lumiloop
-
LSProbe
Lumiloop
Frequency Range: Up to 26.5 GHz (model dependent)
Sample rate: Up to 2 MS/s (burst mode)
signal-transmission: Fully optical
Read more Narda
-
9010 Series (Full-Compliant)
Narda
Read more -
9010/XXP Series (Mixed Full/Pre-Compliant)
Narda
Read more -
Antenna Sets
Narda
Read more -
Click Analyzer
Narda
Read more -
EP600 Series
Narda
Read more -
ER8000 Series (FFT Full-Compliant)
Narda
Read more -
ER9000 Series (FFT Full-Compliant)
Narda
Read more -
FFT Field Receiver
Narda
Read more -
LISN
Narda
Read more -
STS Antennas
Narda
Read more Schlöder GmbH
-
CDG Conducted Immunity Testers
Schlöder GmbH
Standards: IEC 61000-4-6, IEC 60601-1-2 Ed. 4.1, ISO 11452-4, MIL-STD-461 CS114
Frequency Range: 4 kHz – 400 MHz (up to 1200 MHz CDG 7000-E)
Max Output Power: 200 W
Read more -
CDG Series Close Proximity Radiated fields Testers
Schlöder GmbH
Standards: IEC 60601-1-2 Ed. 4.1, IEC 61000-4-39, MIL-STD-461 RS101
Frequency Range: 9 kHz – 26 MHz
RF Generator: CDG 7000-75-10, 10 kHz – 250 MHz, 75 W
Read more -
CDN BCI Bulk Current Injection probes
Schlöder GmbH
Standards: IEC 61000-4-6, ISO 11452-4, MIL-STD-461 CS114
Frequency Range: 10 kHz – 400 MHz
Max Cable Diameter: 46 mm
Read more -
CDN BCI Bulk Current Injection probes/Monitor Probes
Schlöder GmbH
Standards: IEC 61000-4-6, ISO 11452-4, MIL-STD-461 CS114
Frequency Range: 1 MHz – 400 MHz (4 kHz – 400 MHz with MT-1)
Max Cable Diameter: 40 mm
Read more -
CDN Series Coupling/Decoupling Networks
Schlöder GmbH
Standards: IEC 61000-4-6, NAMUR NE-21
Frequency Range: 10 kHz – 230 MHz
Max Current: 125 A
Read more -
CWG Surge Simulators
Schlöder GmbH
Standards: IEC 61000-4-5
Max Voltage: 4400 V (standard), up to 30 kV (modular)
Max Current: 2200 A (standard), up to 30 kA (modular)
Read more -
EMCL Coupling Clamps / ABCL Decoupling Clamps
Schlöder GmbH
Standards: IEC 61000-4-6
Frequency Range: 100 kHz – 1000 MHz (extendable to 10 kHz with NW_10)
Max Cable Diameter: 35 mm
Read more -
MGA Series Power Frequency Magnetic Field Testers
Schlöder GmbH
Standards: IEC 61000-4-8, MIL-STD-461, ISO 11452-8, DO-160 §18/19
Frequency Range: DC – 250 kHz
Amplifier Output: 50 V / 16 A
Read more -
SESD ESD Electrostatic Discharge Simulators
Schlöder GmbH
Standards: IEC 61000-4-2, ISO 10605
Max Voltage: 30 kV (air and contact discharge)
Network: 150 pF / 330 Ω
Read more -
SFT Electrical Fast Transient / Burst Simulators
Schlöder GmbH
Standards: IEC 61000-4-4
Frequency Range: 125 kHz – 2 MHz
Max Voltage: 5 kV
Read more -
VIS Series Voltage interruptions, variations and dips Simulators
Schlöder GmbH
Standards: IEC 61000-4-11 (AC), IEC 61000-4-29 (DC)
Max Current: 16 A per conductor
Phases: Single-phase and three-phase
Read more Shieldex
-
C-Series (Automotive Enclosure)
Shieldex
Read more -
Inflatable Series
Shieldex
Read more -
P-Series (Person Tent)
Shieldex
Read more -
Reverberation Chamber
Shieldex
material: Ag/Cu/Ni /Sn plated Nylon fabrics. Double or triple layer
size: Custom-made sizes
shielding-effectiveness: 95 dB from 30 MHz - 18 GHz (40 GHz)
Read more -
T-Series (Table Top)
Shieldex
Read more Tekbox
-
Biconical Antennas
Tekbox
Read more -
Bulk Current Injection Probes
Tekbox
Read more -
CDN
Tekbox
Read more -
CDN Emission
Tekbox
Read more -
Comb Generators
Tekbox
Read more -
EMC Software
Tekbox
Read more -
High Saturation Monitor Probes
Tekbox
Read more -
Horn Antennas
Tekbox
Read more -
Hybrid Antennas
Tekbox
Read more -
Line Impedance Stabilization Networks (LISN)
Tekbox
Read more -
Log Periodic Antennas
Tekbox
Read more -
Loop Antennas
Tekbox
Read more -
MIL-STD-461 Antennas
Tekbox
Read more -
Near Field Probes
Tekbox
Read more -
Open GTEM Cell
Tekbox
Read more -
Open TEM Cell
Tekbox
Read more -
RF Current Monitor Probes
Tekbox
Read more -
Shielded Tents
Tekbox
Read more -
Tripods
Tekbox
Read more