Narda STS

Leader in EMC – Electromagnetic Compatibility and EMF electromagnetic field measurement

Narda-STS (formerly PMM) develops EMC test systems and components for EMI/EMC immunity and emission measurements. PMM recognizes some of the finest test equipment for electromagnetic compatibility (EMC) applications available today. They also provide support for you, the user, in the form of our service program, which includes servicing, calibration and training events.

New ER8000
CISPR 16-1-1 Compliant FFT  EMI receiver
Extremely Fast and accurate
9 kHz – 30 MHz or 3 GHz
Built in LISN
New ER9000
CISPR 16-1-1 Compliant FFT EMI Receiver
Very fast FFT scan gapless
(2 sec. In Band B, 1 min. In Band C + D)
10 Hz – 30 Mhz or 3 GHz
9010F FFT
Fast Full compliance receiver
10 Hz – 30 MHz
Extendable to 3, 6 or 18 GHz
9010/XXP
Full/Pre compliance receivers
10 Hz- 6 GHz
9030, 9060, 9180
External units full compliance
30 MHz – 18 GHz
New CA0010
4 Channel Click Analyzer
PMM FR4003
Full compliance field receiver
9 kHz – 30 MHz
EP-600
Wideband Electric Field Probes, Battery Powered

  • EP-600, 100 kHz – 9.25 GHz, 0.14 – 140 V/m
  • EP-601, 10 kHz – 9.25 GHz, 0.5 – 500 V/m
  • EP-602, 5 kHz – 9.25 GHz, 1.5 – 1500 V/m
  • EP-603, 300 kHz – 18 GHz, 0.17 – 170 V/m
  • EP-604, 300 kHz – 26.5 GHz, 0.4 – 800 V/m
 Image  Model Frequency Range
 
  STS BL-01 Biconical Log Periodic Antenna 30 MHz – 6 GHz
Biconical
  BC-01 Biconical Antenna, Gain -15 +2 dBi typ, AF 8 to 14 dB/m typ, 100 Watt, N connector 30 – 200 MHz
Log Periodic
LP-02 Log Periodic Antenna, Gain 6 dBi typical, AF 13 to 36 dB/m typ, 50/100 Watt, N connector 200 MHz – 3 GHz
  LP-03 Log Periodic Antenna, Gain  6 dBi typ, AF 23 to 40 dB/m typ, 75 Watt,  N connector 800 MHz – 6 GHz
   LP-04 Log Periodic Antenna, Gain 6 dB typ, AF 12 to 40 dB/m typ, 100 Watt, N connector 200 MHz – 6 GHz
Horn
DR-01 Double Ridged Antenna, Gain 9-16 dBi typ, AF 36 to 41 dB/m typ, 150 Watt, N connector 6 – 18 GHz
  Antenna Sets
  AS-02 consisting of BC-01, LP-02
AS-03 consisting of BC-01, LP-02, LP-03
AS-04 consisting of BC-01, LP-04
AS-05 consisting of BC-01, LP-04, DR-01
AS-06 consisting of BC-01, LP-02, LP-03, DR-01
AS-07 consisting of BL-01
AS-08 consisting of BL-01, DR-01
30 MHz – 3 GHz
30 MHz – 6 GHz
30 MHz – 6 GHz
30 MHz – 18 GHz
30 MHz – 18 GHz
30 MHz – 6 GHz
30 MHz – 18 GHz
Special Antenna’s
  RA-01 Rod Antenna
RA-01-HV Rod Antenna
9 kHz – 30 MHz
150 kHz – 30 MHz
  VDH-01  Van der Hoofden test-haed (IEC 62493) 20 kHz – 1 MHz
RF-300 Large Loop Antenna System, EN 55015 (CISPR-15) 9 kHz – 30 MHz
COND-IS
Conducted immunity system
10 kHz – 230 MHz
IEC/EN 61000-4-6
RAD-IS
Radiated immunity system
9 kHz – 3 GHz, 1500 V/M
IEC/EN 6100-4-3
RAD-AUT
Automotive Immunity
ISO 11452-4 and ISO 11452-5
PMM 1008
Magnetic field generator EN 61000-4-8
50/60 Hz
1200 Sevaral Loop Antennas available

With its decades experience as manufacturer, Narda offers a wide range of LISN (Line Impedance Stabilization Network) capable to arrive up to frequency of 400 MHz. The LISN Narda are multistandard and meet the requirements of different regulations: CISPR 16-1- 2, VDE 0876, FCC part 15, MIL-STD 461F, CISPR 25 / ISO 11452-2/4/5, ISO 7637-2, MIL-STD-461F, DO-160, ED-14G

 

Image Model Description Frequency Range Current Standards
  L1-150
L1-150M1
Single Line, Multi Standard 10 kHz – 400 MHz 150 A CISPR 16-1-2/25
ISO 11452-2/4/5
ISO 7637-2
MIL-STD-461F
DO-160 (M1 version)
  L2-16B Single-phase LISN 9 kHz – 30 MHz 16 A CISPR 16-1-2
VDE 0876
FCC part 15
MIL-STD 461F
  L3-32  Three-phase plus neutral LISN 9 kHz – 30 MHz 32 A CISPR 16-1-2
VDE 0876
FCC part 15
MIL-STD 461F
  L3-64  Three-phase plus neutral LISN 9 kHz – 30 MHz 63 A

CISPR 16-1-2
VDE 0876
FCC part 15
MIL-STD 461F

  L3-100   Three-phase plus neutral LISN 9 kHz – 30 MHz  100 A

CISPR 16-1-2
VDE 0876
FCC part 15
MIL-STD 461F

L1-500
L3-500
Single or Three phase plus neutral LISN 9 kHz – 30 MHz 500 A

CISPR 16-1-2
VDE 0876
FCC part 15
MIL-STD 461F

CISPR 16-1-2 Passive Voltage Probes

SCH1-1000
SCH2-1000
Voltage probe, 1000 Vac, 35 dB
Voltage probe, 1000 Vac, 30 dB
9 kHz – 30 MHz

CISPR 16-1-2

EMI Signal Generator
9 kHz – 1 GHz
9 kHz –  3 GHz
USB RF Power Meters
9 KHz – 3 GHz, 1 W
RF Amplifiers
9 kHz – 230 MHz
15 Watt for CDN’s
40 Watt for Injection Probes (BCI)