| Brand | MTS Systemtechnik |
|---|---|
| Frequency Range | DC-6000 MHz, model-dependent |
| Connector Type | SMA, BNC, N, TNC |
COAX Series Coaxial Components
Key Features
- Delay line (0.5-4 GHz) for introducing a defined signal delay in a coax path
- DC blocks (500 Hz-6 GHz, plus the DCB series) for removing a DC bias component from an RF line
- Remote power-supply crossover bias tee (FSW series) for combining DC power and RF on one coax line
- Impedance-matching elements (IAG series) and a pulse limiter (DC-230 MHz) for protecting sensitive inputs
| Model | Description |
|---|---|
| COAX-28150 | Delay line, 0.5-4 GHz – SMA. |
| COAX-24315 | DC block, 500 Hz-6 GHz – SMA. |
| COAX-00000-48 | DC block, DCB series. |
| COAX-00000-54 | Remote power-supply crossover bias tee, FSW series. |
| COAX-00000-49 | Impedance matching element, IAG series. |
| COAX-17039 | Pulse limiter DC-230 MHz – BNC. |
COAX Series Coaxial Components
This series bundles smaller coaxial in-line components that condition or protect an RF path rather than route, split or amplify it: a delay line, DC blocks, a remote-power crossover bias tee, impedance-matching elements and a pulse limiter for protecting sensitive inputs against high-energy transients.Who Is the COAX Series For?
Test engineers who need to condition or protect a coaxial RF path: blocking DC bias, injecting remote power, matching impedance, adding a defined delay, or protecting an input against transients.Available Models & Accessories
The range covers a delay line, DC blocks (including the DCB series), a remote-power crossover bias tee (FSW series), impedance-matching elements (IAG series) and a pulse limiter.DC blocks protect equipment from bias voltages.
The 500 Hz-6 GHz DC block and DCB series remove a DC bias component from an RF line without materially affecting the AC signal.
Bias tee for remote powering over the RF line.
The FSW-series crossover bias tee combines DC power and RF signal on a single coax run, for remotely powering line-mounted equipment.
Pulse limiter for transient protection.
The DC-230 MHz pulse limiter protects sensitive receiver inputs against high-energy transients on the line.
Delay line and impedance-matching elements for signal conditioning.
The 0.5-4 GHz delay line and IAG-series matching elements adjust timing or impedance where a test setup requires it.
Request for quote
Looking for a custom solution or a tailored offer? Please fill out the form below, and we’ll get back to you as soon as possible with a personalized quote.
