SGX Series

Sorensen SGX High Power DC Supply with Touch Screen

(4– 150 kW, 10–1000 V, 5–6000 A)


The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

At the heart of the SGX series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power.

Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current.

  • 4 – 15 kW / 3 U Chassis (16 – 30 kW available in Q3 / 6 U Chassis)
  • Wide voltage range 0 -10 V / 0 – 1000 V
  • Low Ripple and Noise
  • Parallel connection up to 150 kW
  • Intuitive touch screen display
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Quickly and expertly control supply with intuitive touch screen.
  • Form, fit and function compatibility with previous SG power supplies

 

Power
Voltage 4/5 kW 8/10 kW 12/15 kW Ripple & Noise
(20 Hz – 300 kHz)
Ripple & Noise
(20 Hz- 20 MHz)
10  400 800 1200 20 mV 50 mV
15 267 534  801 20 mV 50 mV
20  250  500 750 20 mV  60 mV
30  167  334 501 20 mV  60 mV
40  125 250 375 20 mV 75 mV
50  100 200 300 20 mV  75 mV
60  83 167 250 20 mV  75 mV
75  67 133 200  20 mV 100 mV
80 63 125 188  20 mV  100 mV
100  50 100 150 20 mV 100 mV
160  31 63 94  25 mV 150 mV
200  25 50 150  25 mV 175 mV
 250 20 40 60  30 mV  200 mV
300 17 33 50 30 mV 200 mV
330 15 30 45 30 mV 200 mV
400 12 25 38 30 mV 300 mV
500 10 20 30 50 mV 350 mV
600 8 17 25 60 mV 350 mV
800 6.2 12.5 18.7 80 mV 500 mV
1000 5 10 15 100 mV 650 mV