 |
|
Advanced Generation Features for Mainstream Applications
2 channel generators from 60 to 200 MHz with large format display
The DG4000 Series waveform generators are utilized in a wide range of applications because of the many functions combined into one instrument. With capabilities including Function Generation, Arbitrary Waveform Generation, Pulse Generation, Harmonic Generation, Analog/Digital Modulation source, and Counter the DG4000 series can handle a broad array of signal emulation applications from near DC up to 60 or even 200 MHz depending on model and function. The DG4000 utilizes Direct Digital Synthesizer (DDS) technology which delivers stable, precise, low distortion signals. The sleek, upright design features a high resolution 7″ display screen, while the user-friendly interface design and panel layout improves efficiency.
- 60, 100, 160 and 200 MHz
- 2 fully functional channels
- 500 MSa/s sample rate
- 14 bit resolution
- Output voltage up to 10 Vpp into 50 Ohms
- 2 ppm frequency stability
- -115 DBc/Hz phase noise
- 150 built-in waveforms
- Arbitrary waveform generation
- Noise, sweep and burst mode
- Extensive modulation capabilities (AM, FM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM)
- 200 MHz Frequency Counter
- Up to 16th order harmonic generation function
- 7 inch TFT color screen (800 × 480 pixels)
- Standard USB Host (2), USB Device, LAN
- 3 year warranty
| Model | Frequency (Sine) | Frequency Square | Channels | Memory | List Price (ex VAT) |
| DG4202 | 200MHz | 60 MHz | 2 | 16 kpts | € 1.651 |
| DG4162 | 160 MHz | 50 MHz | 2 | 16 kpys | € 1.001 |
| DG4102 | 100 MHz | 40 MHz | 2 | 16 kpts | € 785 |
| DG4062 | 60 Mhz | 25 MHz | 2 | 16 kpts | € 737 |
Rigol DG4000 Series Arbitrary Waveform Generator Introduction Video
RIGOL Arbitrary Waveforms and Harmonics with DG4000: functions explained
Included Accessories
- UltraStation Basic -Basic version of UltraStation wave generation software
- CB-BNC-BNC-MM-100 BNC Cable (1 meter length)
- USB Cable
- Instrument Quick Guide
- Calibration Certificate
- Power Cord
options
Application Software
| Ultra Station-adv | Full advanced version of UltraStation wave generation software for DG1000Z, DG4000, DG5000 Series generators as well as DS1000Z and DS2000A “-S” embedded generators. This is a software upgrade license. |
 |
Accessories
| USB-GPIB | USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB | |
| RM-DG4000 | Rack Mounting Kit for a DS1000Z Series Oscilloscope or DG4000 Series generator. | |
| BAG-G1 | Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope | |
| RA5040K | 40 dB attenuator accessory for oscilloscopes or generators | |
| PA1011 | 10 Watt Power Amplifier | |
| CB-BNC-BNC-MM-100 | BNC Cable (length 1 meter) | |
| ADP0150BNC | 50 Ohm impedance adapter for oscilloscopes or generators |