2.5 to 5 kW General Purpose Amplifiers
The AE Techron 7700 serie are Linear DC-enabled, high-powered aplifiers designed to provide very low noise, low harmonic distortion and fast slew rates. They can safely drive a wide range of resistive, inductive loads. Typical use includes as a power source for EMC testing in applications that require both continuous AC or DC
signals and significant short term (burst) signals.
- Low Noise / Fast Slew Rate
- Up to 200 Apk*
- DC – 100 (150 kHz) Small Signal Bandwidth*
- Stable when driving a wide range of resistive, inductive or capacitive loads
- Four-quadrant operation (source and sink)
- Controlled current or controlled voltage modes of operation
- For greater voltage or current (up to 800 Ap) units can be combined in parallel or series
- Protection circuitry protects the amplifier from input overloads, improper output connection (including shorted and improper loads), over-
temperature, over-current, and supply voltagesthat are too high or low.
* Model dependent
| Model | AC Power up to 20 kHz |
Small Signal | For High Power Applications up to |
Slew rate | output Voltage | Output Impedance |
| 8548 | 3380 watts RMS | 28V p-p to 200 kHz | 50 kHz | >35 V/μs | ±100 Vp | 3.2 mΩ in series with 2.2 μH |
| 7794 | 5000 watts RMS | 28V p-p to 250 kHz | 100 kHz | >35 V/μs | ±100 Vp | 3.2 mΩ in series with 2.2 μH |
| 7796 | 5000 watts RMS | 28V p-p to 250 kHz | 100 kHz | >35 V/μs | ±180 Vp | 3.2 mΩ in series with 2.2 μH |
| 7796HC | 2550 watts RMS | 28V p-p to 250 kHz | 100 kHz | >35 V/μs | ±80 Vp | 3.2 mΩ in series with 2.2 μH |
