| Brand | Anritsu |
|---|---|
| Form factor | Benchtop |
| Category | RF Power Meter |
| Measurement type | Average / Peak Power (sensor dependent) |
| Use Case | Lab / Calibration / Production |
RF Power Meter Bench
The Anritsu RF Power Meter Bench is a high-performance measurement platform designed to deliver high-accuracy RF and microwave power data in laboratory, calibration, and production environments. These instruments provide reliable average and peak power measurements with a frequency range spanning 100 kHz to 65 GHz. Their versatility is enhanced by a wide selection of diode, thermal, and wideband sensors for diverse testing needs.
Key Specifications & Features
- Frequency Range: 100 kHz to 65 GHz
- Measurement Types: Average and peak power (sensor dependent)
- Input Channels: Available in single (ML2437A) or dual (ML2438A) configurations
- Dynamic Range: -70 to +20 dBm using standard diode sensors
- Sensor Compatibility: Supports diode, thermal, universal, pulse, and wideband families
- Time Base Options: Available with Ultra Stability Time Base and GNSS Atomic Clock Receiver
- Mounting Options: Available with front bail handles or rack mount kits with slides
- Calibration: Options for Z540, ISO Guide 25, and Premium Calibration
| MG362XXA-0029 | Option 29, Front Panel Modulation Input/Output Access (Requires Option 27 and either Option 12 or 26) |
| MG362XXA-0030 | Option 30, 600 Ohm External AM/FM Input Impedance (Requires Options 12 and 27) |
| MG362XXA-0033 | Option 33, Phase Noise, Export Option (Cannot be ordered with Options 3, 13, and 56) |
| MG362XXA-0037 | Option 37, Removable SDIO Memory |
| MG362XXA-0056 | Option 56, Ultra Stability Time Base (Requires Option 3 or 13) |
| MG362XXA-0066 | Option 66, GNSS Atomic Clock Receiver (Requires Option 3 or 13) |
| MG362XXA-0025 | Option 25, Pulse Train Modulation (Requires Options 26 and 27) |
| MG362XXA-0026 | Option 26, Pulse Modulation, Internal/External (Requires Option 27) |
| MG362XXA-0027 | Option 27, Modulation Hardware (Requires Option 12, 26, or both for functionality) |
| MA2475D | Standard Diode Sensor 10 MHz – 50 OhmhmhmhmHz (-70 to +20 dBm) |
| MA2442D | High Accuracy Diode Sensor 10 MHz – 18 GHz (-67 dBm to +20 dBm) |
| MA2444D | High Accuracy Diode Sensor 10 MHz – 40 GHz (-67 dBm to +20 dBm) |
| MG362XXA-0001 | Option 1, Rack Mount with Slides (Cannot be ordered with Option 11) |
| MA2445D | High Accuracy Diode Sensor 10 MHz – 50 OhmhmhmhmHz (-67 dBm to +20 dBm) Note: 34VFK50A adapter will be shipped with this unit free of charge |
| MG362XXA-0002 | Option 2, Mechanical Step Attenuator, 90 dB |
| MA2481D | Universal Sensor, 10 MHz – 6 GHz |
| MG362XXA-0003 | Option 3, Low Phase Noise and High Stability |
| MA2482D | Universal Sensor, 10MHz – 18GHz |
| MG362XXA-0010 | Option 10, User Defined Modulation (Requires Options 12, 26 and 27) |
| MA2490A | Wideband Sensor, 50 OhmhmhmhmHz – 8 GHz. |
| MG362XXA-0011 | Option 11, Rack Mount without Slides (Shelf Mount) |
| MA2491A | Wideband Sensor, 50 OhmhmhmhmHz – 18 GHz. |
| MG362XXA-0012 | Option 12, Amplitude, Frequency, and Phase Modulation, Internal/External (Requires Option 27) |
| MA2411B | Pulse Power Sensor, 300 MHz – 40 GHz. |
| MG362XXA-0013 | Option 13, Ultra Low Phase Noise (Requires Option 3) |
| MA24002A | Thermal Power Sensor 18 GHz |
| MG362XXA-0015 | Option 15, High Power Output |
| MA24004A | Thermal Power Sensor, 40 GHz |
| MA24005A | Thermal Power Sensor, 50 OhmhmhmhmHz |
| MA2473D | Standard Diode Sensor 10 MHz – 32 GHz (-70 to +20 dBm) |
| MA2474D | Standard Diode Sensor 10 MHz – 40 GHz (-70 to +20 dBm) |
| ML2400A-05 | Option 5, Power Meter, Front Bail Handle |
| ML2400A-06 | Option 6, Power Meter, Rear Mount Input A (For Model ML2437A only) |
| ML2400A-07 | Option 7, Power Meter, Rear Mount Input A and Reference (For Model ML2437A only) |
| ML2400A-08 | Option 8, Power Meter, Rear Mount Input A, B and Reference (For Model ML2438A only) |
| ML2400A-09 | Option 9, Power Meter, Rear Mount Input B (For Model ML2438A only) |
| ML2400A-98 | Option 98, Calibration to Z540, ISO Guide 25 (For ML243XA Models) |
| ML2400A-99 | Option 99, Premium Calibration (For ML243XA Models) |
| MA2472D | Standard Diode Sensor 10 MHz – 18 GHz (-70 to +20 dBm) |
| MG36221A | Signal Generator 9 kHz to 20 GHz, Output Level -130 dBm to +20 dBm, Phase Noise -136 dBc/Hz (typ.) (10 GHz, 10 kHz offset) |
| MG36241A | Signal Generator 9 kHz to 43.5 GHz, Output Level -130 dBm to +160 dBm, Phase Noise -136 dBc/Hz (typ.) (10 GHz, 10 kHz offset) |
| MG36271A | Signal Generator, 9 kHz to 70 GHz, Output Level -90 dBm to +6 dBm, Phase Noise -136 dBc/Hz (typ.) (10 GHz, 10 kHz offset) |
| ML2437A | Power Meter, 100 kHz — 65 GHz, Single input |
| ML2438A | Power Meter, 100 kHz — 65 GHz, Dual input |
RF Power Meter Bench
The Anritsu RF Power Meter Bench series, featuring models like the ML2437A and ML2438A, provides a high-performance platform for precise RF and microwave power analysis. These benchtop instruments are engineered for demanding environments, including calibration labs and production floors, where accuracy and reliability are paramount. With support for both single and dual input channels, the series allows for flexible measurement setups across a broad frequency spectrum from 100 kHz up to 65 GHz. The platform's strength lies in its extensive compatibility with various sensor technologies, including the MA2470D series standard diode sensors and the MA2440D high-accuracy diode sensors. These sensors enable measurements as low as -70 dBm and up to +20 dBm, ensuring sensitivity for low-level signals. For more specialized requirements, the bench supports thermal sensors like the MA24005A for absolute power accuracy and wideband sensors for complex signal analysis, making it a versatile tool for R&D and verification. User-customizable configurations are a hallmark of the series, offering options such as rear-mount inputs and reference ports to streamline rack-integrated systems. Additional precision options include the Option 56 ultra-stability time base and Option 66 GNSS atomic clock receiver for timing-critical applications. Whether performing pulse power measurements with the MA2411B sensor or standard CW testing, the Anritsu RF Power Meter Bench remains a standard-setter in high-frequency measurement technology.High Frequency Range
Provides precise measurement coverage from 100 kHz up to 65 GHz for diverse microwave applications.
Dual Input Capability
The ML2438A model supports dual inputs to facilitate simultaneous multi-channel power measurements.
Precision Diode Sensors
High-accuracy diode sensors provide a wide dynamic range from -70 to +20 dBm for sensitive testing.
Advanced Calibration Standards
Available with Z540 and ISO Guide 25 calibration options to meet the most stringent laboratory standards.
Comprehensive Sensor Compatibility
The RF Power Meter Bench supports a vast array of Anritsu sensors, including standard diode, thermal, and universal types. This allows users to measure power across frequencies ranging from 10 MHz to 50 GHz with specialized sensors like the MA2475D or MA24005A. The system also supports wideband and pulse power sensors to accommodate complex modulated signals.
Flexible Input and Mounting Options
Models can be configured with single or dual inputs and specific rear-mount options for Input A, Input B, and Reference signals to optimize cable management. These hardware variations, combined with rack mount kits and front bail handles, ensure the meter integrates perfectly into any laboratory or production rack setup. Optional removable SDIO memory is also available for secure data storage and transfer.
Request for quote
Looking for a custom solution or a tailored offer? Please fill out the form below, and we’ll get back to you as soon as possible with a personalized quote.
