Anritsu

2-port VNA
1 MHz — 8.20/43.5 GHz
Dynamic range : 100 dB
Sweep speed: 230 µs/point, typical

2-Port VNA
1 MHz to 8/20/43.5 GHz
Dynamic range : 100 dB
Sweep Speed: 130 µs/point, typical

2-port performance VNA
50 kHz — 8.5/20/43.5/50 GHz
Dynamic range : 140 dB
Sweep speed: 30 μsec/point

1-port VNA
1 MHz — 8/20/43.5 GHz
Sweep speed: 230 µs/point, typical

1-port VNA
150 kHz — 6 GHz
Sweep speed: 120 µs/point, typical

2-port USB Distributed ModularVNA
1 MHz to 8/20/43.5 GHz
Phase synchronized measurements up to 100 meters

Handheld Cable and Antenna Analyzer

Ultraportable Cable and Antenna Analyzer

Handheld Cable And Antenna Analyzer
5 kHz to 4/6 GHz Cable Antenna Analyzer

Handheld Cable And Antenna Analyzer with Spectrum Analyzer
5 kHz to 4/6 GHz Cable Antenna Analyzer
9 kHz to 4/6 GHz Spectrum Analyzer

Microwave Handheld Cable and Antenna Analyzer
available with Vector Network Analyzer and Vector Voltmeter
Frequency Range : 1 MHz — 8/14/20/30/40 GHz

Frequency
|9 kHz to 20/43.5 GHz/70 GHz
SSB Phase Noise
-136 dBc/Hz (typ.) (10 GHz, 10 kHz offset)
Output Level
-130 dBm to +6/+16/+20 dBm

Frequency
100 kHz to 2.7/4/6 GHz
SSB Phase Noise
<-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset)
Output level
Min: -144 dBm (with High power opt.)
Max: +30 dBm (with low power opt.)

Frequency
100 kHz to 2.7/4/6 GHz
SSB Phase Noise
<-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset)
Output Level
Min: -144 dBm (with High power opt.)
Max: +30 dBm (with low power opt.)

Inline Peak Power Sensors
25 MHz to 1 GHz (MA24103A)
350 MHz to 4 GHz (MA24105)

100 kHz — 65 GHz
1 Channel (ML2437A)
2 Channel (ML2438A)

10 MHz to 8 GHz / 18 Ghz/ 26 GHz
–40 dBm to +20 dBm
Affordable sensors with great performance
Damage protection up to +33 dBm

6/8/18/40 GHz models
Up to 195 MHz VBW and 3 ns rise time
Full pulse profiling
Crest factor, CCDF, and statistical measurements

10 MHz to 33 GHz / 40 GHz / 50 GHz
–70 dBm to +20 dBm
Measurement speed of >5,600 readings/s
protection up to +26 dBm avg / +30 dBm peak <10 µs

10 MHz to 8 GHz / 18 GHz
–60 dBm to +20 dBm
Measurement speed of >11,000 readings/s
protection up to +33 dBm avg and +34 dBm peak <10 µs

High frequency microwave connectors,
including Anritsu’s trademarked K, V and
W1 connectors, are for use in commercial
components, test fixtures, and military
systems.

Poor return loss can be a major source of
measurement error. By selecting the
correct adapter with better return loss, you
eliminate measurement error. Precision
measurement adapters are available up to
110 GHz.

Leading in the field of impedance
standards, Anritsu terminations and
Attenuators are unsurpassed for precision
and impedance match, resulting in
increased measurement accuracy.

Offering a wide variety of
standard/precision components as well as
accessories – from batteries to calibration
and verification kits – Anritsu’s offerings
help meet your measurement needs and
requirements.